%20(1080%20%C3%97%201080px)%20(1)_edited_p.png)
HOW WE INSTALL WALL-MOUNTED WORKSHOP CURTAINS
WALL MOUNTED GUIDE
-
Using a scissor lift or scaffolding, safely access the top of the opening where you intend to install the workshop curtain.
-
Make a mark every 1500mm with a sharpie just above the edge of the doorway ledge.
-
Pre-drill a 5mm hole using a steel drill bit over each mark.
-
Take your wall-mounted brackets and install them into your wall using tek screws
-
Slide your industrial curtain track through the bracket fixings and install an end stop on the end side.
-
Hang your workshop curtain on your sliding track
-
(Optional) Install the self adhesive hook and loop to your doorframe edge to allow the curtain to seal shut.
Want more information on this system? Get in touch below.
KEY PRODUCT FEATURES
A weighted chain pocket is a perfect addition to any workshop curtain fitted outdoors, in a drafty area or being used as a spray booth.
WEIGHTED CHAIN POCKET
CLEAR VISION PANEL
Install a clear vision panel in your workshop curtain to improve health and safety and allow natural light to enter your space.
Tripple the tear strength of your workshop curtain by adding our signature seatbelt webbing to prevent eyelets from pulling out.
REINFORCED WEBBING TOP
HOW WE INSTALL WORKSHOP CURTAINS ON A PITCHED ROOF
Installing sliding workshop curtains from a pitched roof has never been simpler. You can use our nationwide installation service or do it yourself. If you opt for the DIY route, you'll need certain parts, all available for purchase in our convenient kit form.
-
Unistrut window brackets
-
Unistut
-
8mm threaded rod
-
Hexagon thread connectors
-
Industrial sliding track
-
Nuts & bolts
-
Workshop Curtains
-
Power Tools
STEP BY STEP GUIDE TO INSTALLING WORKSHOP CURTAINS
-
Gain Safe Access and Install Brackets
-
Use a scissor lift to safely reach your beam.
-
Attach the unistrut window brackets to the beam.
-
-
Slide and Join Unistrut
-
Slide the unistrut through the installed brackets.
-
Connect unistrut sections using strut sleeves, repeating until the area is covered.
-
-
Mark Track Position
-
Use a laser level to mark where the track will be hung, starting from the lowest point in the building.
-
-
Insert and Secure Threaded Rods
-
Insert a threaded rod through the unistrut every 1.5 meters.
-
Secure each rod with a washer and nut.
-
-
Join and Position Track & Install Curtains
-
Use hexagon thread connectors to join the rods to the single bolt track connector.
-
Slide the track into its final position.
-
Hang the workshop curtain
-
Want more information on this system? Get in touch below.
OUR WORKSHOP CURTAIN TROLLIES
THEIR RUNNERS
OUR RUNNERS
WATCH OUR ANTI JAM WHEELS IN ACTION
HOW WE INSTALL CEILING MOUNTED WORKSHOP CURTAINS
RSJ / FLAT STEEL INSTALL GUIDE
-
Using a scissor lift or scaffolding, safely access to your RSJ beam, wooden joist or flat steel section.
-
Using a ceiling mount as a guide, make a mark every 1500mm down your beam allowing for one at each end.
-
Pre-drill a 5mm hole using a steel drill bit over each mark.
-
Take your workshop curtain ceiling mounted bracket and attach these to the beam using tek screws.
-
Slide your industrial curtain track through the bracket fixings and install an end stop on the end side.
-
Add our signature anti-jam wheels to your industrial workshop curtain.
-
insert your sliding workshop curtain on your sliding track and fit your final end stop.
Want more information on this system? Get in touch below.
HOW WE INSTALL WORKSHOP CURTAIN TO A ROLLER SHUTTER DOOR
ROLLER SHUTTER DOOR CURTAIN
-
Roll up your door so it's at the top of your entrance meaning your coil is at it's maximum diameter.
-
Using a scissor lift or scaffolding, safely access to the top of your roller shutter door where you intend to install your workshop curtains.
-
Drill a 10mm hole through either side of the flat plate section that holds your rolled up door in position being mindful to not block any mechanisms of the door.
-
Fit unistrut L brackets to either side of the door and secure them with nylock nuts and bolts.
-
Rest your unistrut on top of your L bracket and secure them in place with nylock nuts and bolts
-
Insert the single bolt track fixing through the holes of the unistrut every 1500mm.
-
insert your industrial curtain rail through the single bolt fixings.
-
Install your plastic workshop curtains with anti jam wheels pre fitted onto your industrial curtain track
-
(optional) install the 2 side infill sections to fully secure your area from draft and dust.
Want more information on this system? Get in touch below.
COMBAT DUST
By installing our industrial workshop curtains you will achieve the best result for preventing dust from entering your unwanted areas, this makes areas much cleaner and easier to manage.
CONTROL CLIMATE
Our workshop curtains improve working temperatures by isolating working zones. This prevents cold drafts from entering working areas when things such as roller shutter doors are opened, making it much easier to regulate internal temperatures.
NOISE REDUCTION
Our workshop curtains walls help dampen sound in noisy environments, such as the loud humming of machines or production lines. installing warehouse partitions makes makes machine humming disapear.
WATCH OUR SPRAY BOOTH CURTAIN INSTALL
Workshop Curtain Material Options
We offer a diverse selection of fabrics for plastic workshop curtains, with our popular options being 610gsm and 900gsm.
Our 610gsm fabric is lightweight, easy to clean, and highly flame-retardant.
Our 900gsm fabric, similar to lorry material, offers superior tear strength, temperature control, and flame retardancy.
Contact us today to find the perfect solution from our range of thicknesses and materials.
Technical Information
Material Weight: 630gsm - 900gsm
Tensile Strength 1200N-3500N
Tear Strength - 150N - 600N
Material Fire Rating Examples: BS7837 Part 2, M2, M1, M0, (NFP92507), BS7838;1996, Class B, EN13501-1, BS 5867:2008 Part 2 (subject to the material chosen)
Working Temperatures: - 50 / + 800 degrees centigrade (subject to the material chosen)
Frequently Asked Questions for Workshop Curtains
Are Workshop Curtains easy to install?
Yes, workshop curtains can be very easy to install. We provide numerous installation guides and diagrams to simplify the process. However, if you feel your installation is beyond your capabilities, contact us to discuss our installation service.
Can I customize my workshop curtain design?
Absolutely! Our team of workshop curtain experts will work with you to make various modifications to your product. This could include adding chain pockets, clear vision panels, or additional reinforcement.
Do you offer an installation service?
Yes, we have a full-time team of workshop curtain installers ready to help bring your project to life. We're fully insured, have all the necessary certifications, and can provide complete risk assessments and method statements before commencing work.
How long do workshop curtains last?
When installed by us, we offer a 10-year guarantee for 610gsm and a 15-year guarantee for 900gsm workshop curtains. If you install them correctly and use them properly, they can last a lifetime.
Do workshop curtains help improve building temperatures?
Yes! Workshop curtains significantly improve internal building temperatures by isolating specific areas of your facility, preventing cold drafts from entering. This is one of the primary reasons companies choose us.
What's your lead time?
Typically, we offer a 7-10 day lead time for supply-only orders and a 4-6 week lead time for supply and installation.
How do I contact you?
Email us at sales@factorydividers.co.uk, submit an enquiry form, or call us on 01246 720191.
Workshop Curtain Benefits
-
Temperature Control: Workshop curtains help maintain ideal facility temperatures and save energy.
-
Noise Reduction: Flexible factory partitions act as sound barriers, reducing noise pollution between workspaces.
-
Dust and Debris Control: Warehouse divider walls prevent the spread of dust, debris, and contaminants, enhancing cleanliness and safety.
-
Cost-Effective: Compared to permanent walls, industrial partition walls offer a cost-effective solution for warehouse partitioning.
-
Maximize Space: Use workshop curtains to create partitions between different stages of production processes.
-
Hygiene Control: Maintain cleanliness and hygiene by preventing cross-contamination with workshop curtains.